TalkTalk TV Plus Box Reset via Maintenance Menu
Maintenance or recovery mode is useful to reset your TV Box, but you should only use this option after all other diagnostics have been completed.
If your TalkTalk TV box is stuck booting up after switching it on, or is failing to respond to the remote control or any manual button combinations, you should power off your TV box at the mains and wait for a few minutes before switching it back on again.
This should work for DN360T DN370T DN372T model Boxes
When powered back on, if the box displays the same behaviour, you should follow the steps below for your TV Box:
- Turn the power on using the button at the back of the box
- Press the power button on the front of the box
- Very quickly, press and hold the + and - buttons on the front of the box together for 10-15 seconds
- You should see the start screen on your TV, followed by the Maintenance Mode screen
- Select one of the options from the list displayed. We recommend trying a ‘Software Reset’ first
- If the 'Software Reset' and ‘Factory Reset - Keep Recordings’ doesn’t work, then repeat steps 1 to 4 above and this time select ‘Factory Reset - Delete Recordings’.
1 comment
DN370t and DN372t fail to record scheduled programs after latest (EE?) update.I can play old recordings. Has FTA recording been disabled?
———
Freesat Spares replied:
There has been a lot of changes to the talktalk system but we are not aware of a issue that would stop recording, maybe a new hard drive is needed?