Software Update For: Sagem Freesat+ Recorder DTR94500S

Old Device Updates: Sagem DTR94500S

Sold by Argos and others the Sagem range of boxes were very popular for many years but the website of information from Sagem is now no longer online, so we are trying to save the information

Please be aware you take your own reasonability for updating any device with the information we have provided

Software Update For: DTR94500S

Download update HERE (Zip File that needs to be Extracted)

Instructions on how to upgrade your box to version 1603

For an easy & successful manual software upgrade, please follow the steps below. If at any stage you are unsure please feel free to download and watch the video demonstration below

    1. Check your current software version 

    • Press MENU on your remote control and select INFORMATION
    • Open the RECEIVER submenu
    • Check your software version (SW Version)

    If your box uses an older version than we recommend you perform manual update to ensure you get the most out of your product.

    2. Prepare your USB key

    • Use a USB key smaller than 4GB
    • Format your USB key to FAT32
    • Store the target file SC604CB7.1603 in the root directory of a USB media storage.

    3. Perform the manual software upgrade

    • Disconnect your box from the power cable
    • Connect your USB key in the front panel of your box
    • Plug the power cable into the back of your box
    • The screen of the box will display "8888" for approx. 5 seconds
    • While "8888" is displayed, press the GREEN button on your remote control & than the M button (menu)
    • The box will now upload the software and display the progress from 01-- to 04-- (this will take approx. 1-2 minutes)
    • When you reboot your box the new software has been uploaded.
    Back to blog